Designed to enhance the convenience
and flexibility of Apex II Operations
Cost Effective option for
Storage, Data Transmission and Battery Charging
|Designed specifically with the Apex II user
in mind. As an alternative method of transmitting data to and from the
Apex II and the PC, you’ll find the convenience of the cradle and worth
while option for all your portable applications.
Apex II Storage
Extend the life of your Apex II. History has proven that the use
of specially designed stands can prevent equipment from careless handling.
Constructed from industrial, high strength polycarbonate blend plastic, the
cradle is a safe and clean "home" area for the Apex II either in an
office or on the shop floor.
Upload - Download from the Apex II
The communications cradle makes the routine operation of
transmitting data and/or programs to and from the PC efficient, user-friendly
and expedient. The operator can initiate data transmission either from the PC or
the Apex II placed in the cradle.
Not only can the battery inside the Apex II be recharged while it
is in the cradle, a back-up battery can also be charged in the external battery
charging port. Both stations condition the battery prior to recharging. If time
is a factor, consider that the internal battery station recharges a battery in
approximately 6 hours, while external battery station recharges take only 1˝ -
2 hours to accomplish the task.
||32 to 122° F (0 to 50° C)
||-13 to 140° F (-25 to 60° C)
||5 to 95% (non-condensing)
||15 kv to any external surface
||FCC / CE approved
||RS 232-C (9 pin "D")
||5.0" H x 6.0" W x 6.5" D
||ABS poly carbon blend
Designed with "User Convenience"
At the end of a shift, merely place the Apex II in its cradle and
initiate the upload. Not only is the unit now stored safely and the data that
was collected uploaded to the PC, but it is also charging the internal battery
and prepared for a download of data for the next days tasks.